SANRAD I3.1.1205 - Manual (Page 73)

Chapter 4: V-Switch Configuration 4-21
Discovery of iSCSI Storage Devices
An iSCSI device can have many portals. Each portal can have remote targets
associated with it. In order for the V-Switch to recognize a portal’s remote
targets, you must define the IP Address of the iSCSI portal. Once defined, the
V-Switch will automatically receive the list of remote targets attached to the
portal.
iscsi discovery rportal show
This command displays iSCSI remote portals.
iscsi discovery rportal show
iscsi discovery rportal set
This command allows you to set the interval (period) for the V-Switch to poll
the network for iSCSI targets.
iscsi discovery rportal set
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS OF
NETWORK PORT
MANDATORY 212.199.43.70
-port TCP PORT TCP PORT FOR
I SCSI
COMMUNICATION
OPTIONAL
DEFAULT :
3260
5003
-period PERIOD PERIOD FOR
REDISCOVER IN
SECONDS OPTIONAL
DEFAULT :
1800
Example:
The V-Switch will poll the network for remote portals every 10 minutes.
iscsi discover rportal set –ip 212.199.43.66 –period 600