SANRAD I3.1.1205 - Manual (Page 50)

3-10 SANRAD V-Switch CLI User Manual
10
21
9
Management Port - RJ45
Figure 3-8. V-Switch 3000 Management Port
The management port has two LEDs:
ƒ act – indicates whether the port is connected and active: green – active;
blinking – port traffic
ƒ 100 – indicates how the port is operational: on – 100; off – 10.
10
07
6
act LED
100 LED
Figure 3-9. V-Switch 3000 Management Port LEDs
LCD
The LCD is located on the front left of the V-Switch 3000. The LCD has two
rows of 16 characters each in addition to six control buttons. Use the LCD
buttons and display for initial V-Switch 3000 configurations immediately after
power up. For more information on configuring the V-Switch 3000 via LCD,
refer to “Configuring the V-Switch 3000 Management Parameters via LCD”.
102
21
LCD
Figure 3-10. LCD Display Panel