SANRAD I3.1.1205 - Manual (Page 36)

2-8 SANRAD V-Switch CLI User Manual
The V-Switch 2000 supports two storage ports in any combinations of the
following:
Table 2-2: SCSI Storage Port Connection Type
SCSI C ONNECTOR L ENGTH
SCSI U LTRA 3 LVD 160MB/ SEC 68 PIN PORT U P TO 12 M
102
11
FC Storage
Ports
Figure 2-7. V-Switch 2000 FC Storage Ports
Table 2-3: FC Storage Port Connection Types
F IBRE C HANNEL 1 G BIT /2 G BIT NL_ PORT OR
N_ PORT OF EITHER
L ENGTH SFP
ƒ S HORT - WAVE LASER FOR MULTIMODE
FIBER
U P TO 550 M SHORT - WAVE SFP
ƒ L ONG - WAVE LASER FOR SINGLE - MODE
FIBER
U P TO 10 KM LONG - WAVE SFP
Your exact port
configuration will
depend on your V-
Switch 2000 order
specifications.
ƒ C OPPER (1 G BIT ) U P TO 25 M –
When connecting more than one V-Switch 2000 to a group of storage devices,
ensure that the same port on each V-Switch 2000 is used to connect to the same
storage device. This increases the chance of the storage device receiving the
same default storage number on both V-Switches during their auto-discovery
cycles. This, in turn, makes cluster configuration easier.
There are two FC storage port LEDs labeled lnk, one to the left of each storage
port.