Saving (uploading) a v-switch database file – SANRAD I3.1.1205 User Manual
Page 195
Chapter 10: Routine V-Switch Maintenance
10-9
Saving (Uploading) a V-Switch Database File
You can upload a copy of a V-Switch’s full database file to the local TFTP
server. If the V-Switch fails, its database file can be downloaded to the
replacement V-Switch. This eliminates protracted configuration time on the
new V-Switch and ensures configuration integrity.
Use the CLI command ft upload to upload a V-Switch’s full database file
ft upload
You need to define three parameters to upload a database file:
S
WITCH
P
ARAMETER
D
EFINITION
S
TATUS
E
XAMPLE
-ip
IP
ADDRESS
IP
ADDRESS OF
STATION WHERE
TFTP APPLICATION
SITS
MANDATORY
212.199.43.70
-fn
FILE NAME
COMPLETE PATH
AND NAME TO SAVE
FILE AS
MANDATORY
VSwitch/v1_9/
v1_9database
-ft
FILE TYPE
FORMAT TO SAVE
DATA IN
OPTIONAL
DEFAULT
:
DB
(
DATA BASE
)
db
Example:
Upload the file v1_9dat as a database file to the tftp server at 212.199.43.70.
ft upload –ip 212.199.43.70 –fn VSwitch/v1_9/
v1_9database –ft db