SANRAD I3.1.1205 - Manual (Page 227)

Chapter 11: Command Line Interface 11-13
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-act ACTIVITY IF IP ADDRESS IS
ACTIVE TO EXPOSE
VOLUMES
. U SE
INACTIVE STATUS
TO ALLOW
FAILOVER
.
OPTIONAL
DEFAULT : 1
( ACTIVE ).
2( INACTIVE )
1
Example
ip config set –ip 212.199.43.56 –if eth1 –act 1
ip config remove
This command removes an IP address from an interface.
ip config remove
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS TO
REMOVE FROM THE
NETWORK
INTERFACE PORT
MANDATORY 212.199.43.70
Example
ip config remove –ip 212.199.43.70
ip route default
This command sets a default IP route to a network port.
ip route add
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-gw GATEWAY IP
ADDRESS
IP ADDRESS OF THE
DEFAULT GATEWAY
ROUTER
MANDATORY 30.30.20.20
-if INTERFACE
ALIAS NETWORK PORT TO
OPEN
COMMUNICATION
THROUGH OPTIONAL
MGNT OR ETH 1
DEFAULT : ETH 1
eth1
ip route add
This command adds an IP route to a network port.