SANRAD I3.1.1205 - Manual (Page 91)

Chapter 5: V-Switch Cluster Configuration 5-11
Managing a Cluster
If you modify a V-Switch alias or management IP address, you must implement
the updates in the neighboring V-Switch. Use the CLI command neighbor
set
to update a V-Switch on changes in its neighbor.
neighbor set
You need to define the parameter(s) to modify to reset a neighbor alias or IP
address in a cluster.
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-nb NEIGHBOR ALIAS NEIGHBORING V-
S WITCH IN
CLUSTER
OPTIONAL VSwitch2
-ip NEIGHBOR
MANAGEMENT
IP
ADDRESS
MANAGEMENT IP
OF THE
NEIGHBORING
V-
S WITCH
OPTIONAL 212.199.43.75
Use the CLI command neighbor remove to remove a neighbor from a
cluster.
neighbor remove
You need to define two parameters to remove a neighbor.
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-nb NEIGHBOR ALIAS NEIGHBORING V-
S WITCH IN
CLUSTER
MANDATORY VSwitch2
-ip NEIGHBOR
MANAGEMENT
IP
ADDRESS
MANAGEMENT IP
OF THE
NEIGHBORING
V-
S WITCH
MANDATORY
Use the CLI command cluster set to modify the default keep alive
intervals.
cluster set