SANRAD I3.1.1205 - Manual (Page 181)

Chapter 9: Routine Volume Maintenance 9-3
Disk 3 Disk 4
Simple 2
Disk 1
Simple 1
Simple 4
Simple 3
Disk 2
Simple 8
Disk 5
Simple 7
Simple 10
Disk 6
Simple 9
Disk 7 Disk 8
100
92
Simple 5 Simple 6 Simple 11 Simple 12
JBOD 1 JBOD 2
Striped
Volume 1
Figure 9-1. Stripe 1 Volume Removed
Removing all Volumes in a Hierarchy
If you are working in
a V-Switch cluster,
the volume must be
removed on both V-
Switches.
You can remove a volume and all of its component volumes in a volume
hierarchy. The volume must be at the top of the hierarchy. The volume
cannot be exposed; the volume LUN must be inactivated. Simple
volumes will convert back to subdisks.
volume remove -all
You need to define one parameter to remove all volumes within a volume
hierarchy:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-all ALL ALL VOLUMES IN
HIERARCHY MANDATORY No parameter
required
-vol VOLUME ALIAS ALIAS OF TOP -
LEVEL VOLUME TO
REMOVE
MANDATORY Stripe1