SANRAD I3.1.1205 - Manual (Page 226)

11-12 SANRAD V-Switch CLI User Manual
snmp manager remove
This command removes a manager from the V Switch.
snmp manager remove
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS MANAGER IP
ADDRESS
MANDATORY 212.199.43.96
-p UPD PORT P ORT TO RECEIVE
TRAPS THROUGH
MANDATORY 150
ip config show
This command displays the V Switch IP configurations.
ip config show
Table 11-8: V Switch IP Configurations
If Name IP Address Net Mask Activity
mgmt 212.199.43.46 255.255.255.0 Active
eth1 212.199.43.56 255.255.255.0 Active
eth1 212.199.43.57 255.255.255.0 Inactive
eth2 212.199.75.66 255.255.255.0 Active
eth3 212.199.12.67 255.255.255.0 Inactive
eth3 212.199.12.70 255.255.255.0 Active
ip config set
This command configures a new interface alias or edits an existing one.
ip config set
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS
ASSIGNING TO THE
INTERFACE PORT
MANDATORY 212.199.43.56
-if INTERFACE ALIAS
OR NAME NETWORK
INTERFACE PORT MANDATORY
ETH 1, ETH 2,
ETH 3
eth1
Executing this
command on the
same network port
with a different IP
address will not reset
the network port
address. It will add
another IP address to
the network port
-im IP MASK IP NET MASK OPTIONAL
DEFAULT :
255.255.255.0