SANRAD I3.1.1205 - Manual (Page 241)

Chapter 11: Command Line Interface 11-27
storage remove
This command removes a storage device from the database only if the storage
device state is defined as StorageIsMissing.
storage remove
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-s STORAGE ALIAS OF STORAGE
TO REMOVE MANDATORY Stor_1
subdisk create
This command creates a subdisk according to the input parameters.
subdisk create
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-d DISK ALIAS ALIAS OF DISK IN
WHICH TO CREATE
THE SUBDISK MANDATORY Disk 1
-sl SUBDISK LENGTH LENGTH IN
BLOCKS OF
SUBDISK MANDATORY 18000000
-sa START ADDRESS BLOCK ADDRESS TO
BEGIN CREATING
SUBDISK FROM OPTIONAL
DEFAULT : 0
0
-sd SUBDISK ALIAS ALIAS FOR NEW
SUBDISK OPTIONAL
DEFAULT
FORMAT
: D EF _
SPLIT _ CLUSTER
NO ._ DISK NO ._
END ADDRESS
Subdisk 1
subdisk show
This command shows all/specified subdisks connected to the V Switch.