Configuring the vcs as a traversal client, Overview, Adding a new traversal client zone – TANDBERG D14049.01 User Manual
Page 101: Overview adding a new traversal client zone, Configuring the, Vcs as a traversal client, Firewall traversal
0
D 14049.01
07.2007
0
Configuring the VCS as a Traversal Client
Adding a New Traversal Client Zone
VCS Configuration > Zones
.
You will be taken to the
Zones
page.
Select
New
.
You will be taken to the
Create Zone
page.
•
•
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the
Type
drop-down menu, select
TraversalClient
.
Create Zone
Click here to create the zone. You will be
taken directly to the
Edit Zone
page, where
you can configure the traversal client zone as
required.
Overview
To enable your VCS to act as a traversal
client on behalf of its endpoints and neighbor
gatekeepers, you must create a connection
between it and a traversal server (e.g. a VCS
Border Controller).
You do this by adding a new traversal client
zone and configuring it with the details of the
traversal server.
You can create more than one
traversal client zone if you wish to
connect to multiple traversal servers.
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Traversal