TANDBERG D14049.01 - Manual (Page 167)

D 14049.01
07.2007 67
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xStatus
Alternates:
Alternate [1..5]:
Status: <Active/Failed/Unknown>
Cause: {Visible if status is Failed} <No response from gatekeeper/DNS resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
LastStatusChange: <Seconds since boot/Date Time>
UserPolicyManager:
Mode: <Off/Local/Remote>
Status: <Active/Inactive/Unknown> {Visible if Remote}
Address: <1..1024> {Visible if Remote}
H323:
Registration:
Status: <Active/Inactive/Failed>
IPv4: {Visible if Status=Active}
Address: <IPv4Addr>
IPv6: {Visible if Status=Active}
Address: <IPv6Addr>
CallSignaling:
Status: <Active/Inactive/Failed>
IPv4: {Visible if Status=Active}
Address: <IPv4Addr>
IPv6: {Visible if Status=Active}
Address: <IPv6Addr>
Assent:
CallSignaling:
Status: <Active/Inactive/Failed>
IPv4: {Visible if Status=Active}
Address: <IPv4Addr>
IPv6: {Visible if Status=Active}
Address: <IPv6Addr>