Configuring the vcs as a traversal server, Overview, Adding a new traversal server zone – TANDBERG D14049.01 User Manual
Page 103: Overview adding a new traversal server zone, Configuring, The vcs as a traversal server, Firewall traversal
03
D 14049.01
07.2007
03
Configuring the VCS as a Traversal Server
Overview
The VCS has an optional Border Controller
feature. Once this has been enabled, you will
be able to:
Allow your VCS to act as a traversal
server for other VCSs and TANDBERG
Gatekeepers. You do this by adding a new
traversal server zone on the VCS, and
configuring it with details of the traversal
client.
Provide firewall traversal for any TANDBERG
MXP endpoints registered directly with it.
You can configure the protocols and ports
that will be used.
Enable and configure STUN services.
Configure the ports used specifically for
firewall traversal services.
The following sections describe how to
configure each of the above options.
•
•
•
•
Adding a New Traversal Server Zone
VCS Configuration > Zones
.
You will be taken to the
Zones
page.
Select
New
.
You will be taken to the
Create Zone
page.
•
•
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones.
Type
From the
Type
drop-down menu, select
TraversalServer
.
Create Zone
Click here to create the zone. You will be
taken directly to the
Edit Zone
page, where
you can configure the traversal server zone as
required.
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Firewall Traversal