TANDBERG D14049.01 - Manual (Page 147)

D 14049.01
07.2007 47
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConfiguration
Zones
cont... Zone [..00]
cont... TraversalClient
cont... SIP Port: <04..65534>
Specifies the port on the traversal server to be used for SIP calls from this VCS.
Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from the traversal server.
TCP : TCP will be used.
TLS : TLS will be used.
TraversalServer Authentication UserName: <S: , 8>
If the traversal client is a VCS, this must be the VCS’s Authentication User Name. If the traversal client is a
gatekeeper, this must be the gatekeeper’s System Name.
H33 H4609 Demultiplexing Mode: <On/Off>
Determines whether the VCS will operate in Demulti-
plexing mode for calls from the traversal client.
On : allows use of the same two ports for all calls.
Off : Each call will use a separate pair of ports for
media.
Port: <04..65534>
Specifies the port on the VCS being used for H.323 firewall traversal from this traversal client.
Protocol: <Assent/H4608>
Determines the protocol to be used for calls from the traversal client.
Assent : the Assent protocol will be used.
H46018 : the H.460.18 protocol will be used.
SIP Port: <04..65534>
Specifies the port on the VCS being used for SIP firewall traversal from this traversal client.
Transport: <TCP/TLS>
Determines which of the two transport types will be used for SIP calls between the traversal client and VCS.
TCP : TCP will be used.
TLS : TLS will be used.