TANDBERG D14049.01 - Manual (Page 124)

D 14046.01
07.2007 4
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Maintenance
About Adding Extra Options
The following VCS features can be added to your existing system by installing the appropriate
options:
Border Controller functionality
user policy
H.323 to SIP Interworking gateway
the number of traversal calls allowed
the number of non-traversal calls allowed
the number of registrations allowed
To add any of these extra options, you need to obtain a valid Option Key and install it on your
system. Contact your TANDBERG representative for more information on how to obtain Option
Keys.
Options can be installed in either of two ways:
via the CLI .
via the web interface .
This section describes both methods.
•
•
•
•
•
•
•
•
Adding Options via the CLI
To return the indexes of all the Option Keys that are already installed on your system:
xStatus Options
To add a new Option Key to your system:
xConfiguration Option [1..64] Key: <S: 0, 90>
•
•
Maintenance
Option Keys
! When using the CLI to add an extra option key, you can use any unused option index. If you
chose an existing option index, that option will be overwritten and the extra functionality
will no longer exist
.