TANDBERG D14049.01 - Manual (Page 135)

D 14049.01
07.2007 35
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConfiguration
Option [..64] Key: <S: 0, 90>
Specifies the option key of your software option. These are added to the VCS in order to add extra functionality, such as increasing the VCS’s capacity. Contact your TANDBERG repre-
sentative for further information.
Policy AdministratorPolicy Mode: <On/Off>
Enables and disables use of Administrator Policy.
On : Administrator Policy is in use.
Off : Administrator Policy is not in use.
UserPolicy Mode: <Off/Local/Remote>
Determines the User Policy Manager usage and location.
Off : User Policy Manager is not used.
Local : the on-box User Policy Manager is used.
Remote : the off-box User Policy Manager is used.
Server Address: <S: 0, 8>
Specifies the IP address or FQDN of the remote User Policy Manager.
Password: <S: 0, 30>
Specifies the password used by the VCS to log in and query the remote User Policy Manager
Path: <S: 0, 55>
Specifies the URL of the remote User Policy Manager.
Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote User Policy Manager.
HTTP : HTTP will be used.
HTTPS : HTTPS will be used.
UserName: <S: 0, 30>
Specifies the user name used by the VCS to log in and query the remote User Policy Manager.