Events logged at level 1, Logging – TANDBERG D14049.01 User Manual
Page 29
D 14049.01
07.2007
9
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Logging
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Logging
Events Logged at Level
Event
Description
Eventlog Cleared
An operator cleared the event log.
Admin Session Start
An administrator has logged onto the system.
Admin Session Finish
An administrator has logged off the system.
System Configuration Changed
An item of configuration on the system has changed.
The
Detail event parameter contains the name of the changed configuration item and its new value.
Policy Change
A policy file has been updated.
Registration Requested
A registration has been requested.
Registration Accepted
A registration request has been accepted.
Registration Rejected
A registration request has been rejected.
The
Reason event parameter contains the H.225 cause code. Optionally, the Detail event parameter may contain a textual representation of the
H.225 additional cause code.
Registration Removed
A registration has been removed by the VCS.
The
Reason event parameter specifies the reason why the registration was removed. This is one of:
Authentication change
Conflicting zones
Operator forced removal
Operator forced removal (all registrations removed)
•
•
•
•
Registration Refresh Rejected
A request to refresh a registration has been rejected.
Unregistration Requested
An unregistration request has been received.
Unregistration Rejected
An unregistration request has been rejected.
Call Answer Attempted
An attempt to answer a call has been made.
Call Attempted
A call has been attempted.
Call Connected
A call has been connected.
Call Disconnected
A call has been disconnected.
Call Rejected
A call has been rejected.
The
Reason event parameter contains a textual representation of the H.225 additional cause code.
Call Bandwidth Changed
The bandwidth of a call has changed.
External Server Communication
Failure
Communication with an external server failed unexpectedly. The event detail data should differentiate between ‘no response’ and ‘request rejected’.
Servers concerned are:
DNS
LDAP servers
Neighbor Gatekeeper
NTP servers
•
•
•
•
System Start
The operating system has started.