Enum dialing for incoming calls, Prerequisites, About dns domains for enum – TANDBERG D14049.01 User Manual
Page 92: Configuring dns naptr records, Example, Configuring enum, Dialing for incoming calls, Text goes here, Enum dialing
D 14049.01
07.2007
9
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
ENUM Dialing
Configuring DNS NAPTR Records
ENUM relies on the presence of NAPTR records, as defined by
RFC 2915 [
]. These are used to obtain an H.323 or SIP URI
from an E.164 number.
The record format that the VCS supports is:
;; order flag preference service regex
replacement
where:
order
and
preference
determine the order in which
NAPTR records will be processed. The record with the
lowest
order
is processed first, with those with the lowest
preference
being processed first in the case of matching
order
.
flag
determines the interpretation of the other fields
in this record. Only the value
u
(indicating that this is a
terminal rule) is currently supported, and this is mandatory.
service
states whether this record is intended to describe
E.164 to URI conversion for H.323 or for SIP. Its value must
be either
E2U+h323
or
E2U+SIP
.
regex
is a regular expression that describes the conversion
from the given E.164 number to an H.323 or SIP URI.
replacement
is not currently used by the VCS and should
be set to
.
(i.e. the full stop character).
•
•
•
•
•
•
About DNS Domains for ENUM
ENUM relies on the presence of NAPTR records as defined
by RFC 2915 [
]. These provide the mapping between E.164
numbers and their SIP/H.323 URIs.
RFC 3761 [
], which is part of a suite of documents that
define the ENUM standard, specifies that the domain for
ENUM - where the NAPTR records should be located for
public ENUM deployments - is
e164.arpa
. However, use of
this domain requires that your E.164 numbers are assigned
by an appropriate national regulatory body. Not all countries
are yet participating in ENUM, so you may wish to use an
alternative domain for your NAPTR records. This domain
could reside within your corporate network (for internal use
of ENUM) or it could use a public ENUM database such as
http://www.e164.org
.
ENUM Dialing for Incoming Calls
Prerequisites
In order for your locally registered endpoints to be reached
using ENUM dialing, you must configure a DNS NAPTR record
that maps your endpoints’ E.164 numbers to their SIP/H.323
URIs. This record must be located at an appropriate DNS
domain where it can be found by any systems attempting to
reach you via ENUM dialing.
Example
For example, the record:
IN NAPTR 10 100 “u” “E2U+h323” “!^(.*)$!h323:\1@
example.com!” .
would be interpreted as follows:
10
is the
order
100
is the
preference
u
is the
flag
E2U+h323
states that this record is for an H.323 URI
!^(.*)$!h323:\[email protected]!
describes the
conversion:
!
is a field separator
the first field represents the string to be converted. In
this example,
^(.*)$
represents the entire E.164 number
the second field represents the H.323 URI that will be
generated. In this example,
h323:\[email protected]
states that the E.164 number will be concatenated with
@example.com
. For example,
1234
will be mapped to
.
.
shows that the
replacement
field has not been used.
•
•
•
•
•
•
•
•
•
•
Non-terminal rules in ENUM are not currently supported
by the VCS. For more information on these, see section
2.4.1 of RFC 3761 [
],