Configuring your findme user account, Configures their account, Settings – TANDBERG D14049.01 User Manual
Page 73: Configure, Your findme options, Using tandberg’s findme
D 14049.01
07.2007
73
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Using TANDBERG’s FindMe™
Configuring your FindMe User Account
Type
Select whether this FindMe name is to apply
to an
individual
or a
group of people
. This
will affect how calls are diverted to the
Busy
devices.
Ring the primary devices
Select the amount of time in seconds you
wish the devices in the
Primary
list to ring
before the call is diverted. Alternatively, you
can specify that the devices will ring
until the
caller hangs up
.
Adding a device to a list
You can have up to five devices in each list. To add a device to any of the lists, enter one of the
following in any of the available fields:
for video endpoints: enter any URL or alias with which the device is registered.
for 3G mobile phones: to route video to your mobile phone, you must have a 3G gateway - enter
the gateway’s prefix followed by the mobile phone number. To route voice only, enter the mobile
phone number along with any prefixes required by your dial plan for external calls.
for telephones: enter the extension number (for internal calls) or telephone number, along with
any necessary prefixes.
•
•
•
Removing
a device
To remove
a device
from a
list, simply
delete the
text from
the relevant
field.
Primary Devices
List the all the device(s) that will ring when
your FindMe name is first dialled.
If more than one device is listed here, they will
all ring at the same time.
Busy Devices
For an
individual
, list all the device(s) that will
ring immediately if any of the devices in the
Primary
list are busy.
For a
group of people
, list all the device(s) that
will ring immediately if all of the devices in the
Primary
list are busy. (If some of the devices
in the Primary list are busy, the rest will
continue to ring for the specified time before
the call will divert to the devices listed here.)
If no devices are listed in this section, the
caller will get a busy response if any/all of the
Primary
devices are busy.
No Answer Devices
List all the device(s) that will ring if none of the
devices in the
Primary
list are answered within
the specified time.
If no devices are listed here, the caller will
receive a “no answer” response if none of the
Primary
devices are answered.
If you have selected a
Timeout period
of
ring
until caller hangs up
, you will not be able to
list any devices here.
!
If no devices are configured for a
FindMe name, all calls to that name
will be rejected.
Ensure that none of
the
Primary
devices
are set to
Autoanswer. If they are, the
system will consider the call
to have been answered when
Autoanswer is initiated, and
so it will not divert the call to
any other devices.
Username
The username for this FindMe account.
FindMe name
The FindMe name being configured.
Save Changes
Click here to update your FindMe account with any changes.
Change Password
Click here to change the password used to
access your FindMe account. You will be
taken to a new page where you can enter the
new password.
Log Out
Click here to exit the FindMe account
configuration page.