TANDBERG D14049.01 - Manual (Page 130)

D 14049.01
07.2007 30
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConfiguration
Authentication
cont... LDAP AliasOrigin: <LDAP/Endpoint/Combined>
Determines which aliases (i.e. from the endpoint or the database) should be used to register the endpoint.
LDAP : the alias(es) presented by the endpoint will be used as long as they are listed in the LDAP database for the endpoint’s username.
Endpoint : the alias(es) presented by the endpoint will be used; any in the LDAP database will be ignored.
Combined : the alias(es) presented by the endpoint will be used in addition to any that are listed in the LDAP database for the endpoint’s username.
BaseDN: <S: 0, 55>
Specifies the Distinguished Name to use when connecting to an LDAP server.
Mode: <On/Off>
Determines whether or not to enforce authentication for H.323 and SIP registrations.
On : authentication is required.
Off : authentication is not required.
Password: <S: 0, 50>
Specifies the password to be used by the VCS when authenticating with another system.
UserName: <S: 0, 55>
Specifies the username to be used by the VCS when authenticating with another system.
Bandwidth Default: <64..048>
Sets the bandwidth (in kbps) to be used on calls managed by the VCS in cases where no bandwidth has been specified by the endpoint.
Downspeed PerCall Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufficient per-call bandwidth available to fulfil the
request.
On : the system will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.
Total Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufficient total bandwidth available to fulfill the
request.
On : the system will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.