TANDBERG D14049.01 - Manual (Page 23)

D 14049.01
07.2007 3
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
text
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
System
Configuration
NTP Configuration
About the NTP Server
Accurate timestamps play an important part in
authentication, helping to guard against replay
attacks. For this reason, we recommend that
you use an NTP server to synchronize the
system time.
Setting the Time Zone
All events are recorded using the local date
and time as well as UTC time. The local time
is determined by the Time Zone set on the
VCS.
System Configuration
Save
Click here to save your changes.
Configuring NTP Settings
To configure the VCS’s NTP settings:
System Configuration > NTP
You will be taken to the NTP page.
xConfiguration NTP Address
xConfiguration TimeZone Name
•
•
•
NTP server
Sets the IP address or FQDN of the NTP server
to be used when synchronizing system time.
Time zone
Sets the local time zone of the VCS.