TANDBERG D14049.01 - Manual (Page 134)

D 14049.01
07.2007 34
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConfiguration
IP
cont... SubnetMask: <IPAddr>
Specifies the IPv4 subnet mask of the VCS. Note: You must restart the system for any changes to take effect.
V6 Address: <S: 0, 39>
Specifies the IPv6 address of the VCS. Note: You must restart the system for any changes to take effect.
Gateway: <S: 0, 39>
Specifies the IPv6 gateway of the VCS. Note: You must restart the system for any changes to take effect.
IPProtocol: <Both/IPv4/IPv6>
Selects the IP protocol(s) supported by the VCS.
Both : the VCS will support both IPv4 and IPv6.
IPv4 : the VCS will support IPv4 only.
IPv6 : the VCS will support IPv6 only.
Note: You must restart the system for any changes to take effect.
LDAP Encryption: <Off/TLS>
Sets the encryption to be used for the connection to the LDAP server.
Off : no encryption is used.
TLS : TLS encryption is used.
Password: <S: 0, 8>
Sets the password to be used when binding to the LDAP server.
Server Address: <S: 0, 8>
Sets the IP address or FQDN of the LDAP server to be used when making LDAP queries.
Port: <..65534>
Sets the IP port of the LDAP server to be used when making LDAP queries.
UserDN: <S: 0, 55>
Sets the user distinguished name to be used when binding to the LDAP server.
Log Level: <..3>
Controls the granularity of event logging. 1 is the least verbose, 3 the most.
Server Address: <S: 0, 8>
Specifies the IP address or FQDN of the server to which the log will be written.
NTP Address: <S: 0, 8>
Sets the IP address or FQDN of the NTP server to be used when synchronizing system time.