TANDBERG D14049.01 - Manual (Page 140)

D 14049.01
07.2007 40
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xConfiguration
Traversal
cont... Server
cont.. STUN
cont... Relay Mode: <On/Off>
Determines whether the VCS will offer STUN relay services to traversal clients.
On : STUN relay services are available.
Off : STUN relay services are not available.
. Port: <04..65534>
Specifies the listening port for STUN relay requests.
Media Port Start: <04..65534>
Specifies the lower port in the range to be used for
STUN media relay.
End: <04..65534>
Specifies the upper port in the range to be used for
STUN media relay.
Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode: <None/Limited/Unlimited>
Determines whether there is a limit on the bandwidth
for any one call to or from an endpoint in the Default
Subzone.
None : no bandwidth will be available.
Limited : there will be a limit on the bandwidth.
Unlimited : there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the bandwidth limit (in kbps) for any one
call to or from an endpoint in the Default Subzone.
Intra Mode: <None/Limited/Unlimited>
Determines whether there is a limit on the bandwidth
for any one call between two endpoints within the
Default Subzone.
None : no bandwidth will be available.
Limited : there will be a limit on the bandwidth.
Unlimited : there will be no limit on the bandwidth.
Limit: <..00000000>
(applies only if Mode is set to Limited)
Specifies the bandwidth limit (in kbps) for any one call
between two endpoints within the Default Subzone.