Text goes here, Command reference - xconfiguration – TANDBERG D14049.01 User Manual
Page 146
D 14049.01
07.2007
46
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration
Zones
cont...
Zone [..00]
cont...
Neighbor
Alternate [..5]
Address: <S: 0, 8>
Specifies the IP addresses or FQDNs of any Alternates configured on this neighbor.
H33
Port: <04..65534>
Specifies the port on the neighbor to be used for H.323 calls to and from this VCS.
Primary
Address: <S: 0, 8>
Specifies the IP address or FQDN of this neighbor.
SIP
Port: <04..65534>
Specifies the port on the neighbor to be used for SIP calls to and from this VCS.
Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from this neighbor.
TCP
: TCP will be used.
TLS
: TLS will be used.
SIP
Mode: <On/Off>
Determines whether SIP calls will be allowed to and from this zone.
On
: SIP calls will be allowed.
Off
: SIP calls will not be allowed.
TraversalClient
Alternate [..5]
Address: <S: 0, 8>
Specifies the IP address or FQDN of any Alternates of the traversal server.
H33
Port: <04..65534>
Specifies the port on the traversal server to be used for H.323 firewall traversal calls from this VCS.
Protocol: <Assent/H4608>
Determines which of the two firewall traversal protocols to use for calls to the traversal server when both are
available.
Assent
: the Assent protocol will be used.
H46018
: the H.460.18 protocol will be used.
Primary Address: <S: 0, 8>
Specifies the IP address or FQDN of the traversal server.
RetryInterval: <..65534>
Specifies the interval in seconds with which a failed attempt to establish a connection to the traversal server should be retried.