TANDBERG D14049.01 - Manual (Page 31)

D 14049.01
07.2007 3
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Logging
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
System
Configuration
Logging
Field Description
Protocol Specifies which protocol was used for the communication.
Valid values are:
TCP
UDP
TLS •
•
•
Reason Textual string containing any reason information associated with an event.
Service Specifies which protocol was used for the communication.
A service entry is one of:
H.323
SIP
H.225
H.245
NTP
DNS
LDAP
Q.931
Neighbor Gatekeeper •
•
•
•
•
•
•
•
•
Message Type Specifies the type of the message.
ResponseCode SIP response code.
Src-ip Specifies the source IP address (the IP address of the device attempting to establish communications).
The source IP is recorded in the dotted decimal format: (number).(number).(number).(number) or the IPv6 colon separated format.
Dst-ip Specifies the destination IP address (the IP address of the destination for a communication attempt).
The destination IP is recorded in the same format as
Src-ip.
Dst-port Specifies the destination port: the IP port of the destination for a communication attempt.
Src-port Specifies the source port: the IP port of the device attempting to establish communications.
Src-Alias If present, the first H.323 Alias associated with the originator of the message
If present, the first E.164 Alias associated with the originator of the message
Dst-Alias If present, the first H.323 Alias associated with the recipient of the message
If present, the first E.164 Alias associated with the recipient of the message
Auth Whether call attempt has been authenticated successfully.
Method SIP method (INVITE, BYE, UPDATE, REGISTER, SUBSCRIBE, etc)
Contact Contact: header from REGISTER
AOR Address of record
Event Data Fields