TANDBERG D14049.01 - Manual (Page 153)

D 14049.01
07.2007 53
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Appendices
Command Reference - xCommand
xCommand Description Parameters
PipeAdd Adds and configures a new pipe. PipeName (r) : <S: , 50>
Assigns a name to this pipe.
TotalMode: <None/Limited/Unlimited>
Determines whether or not this pipe is enforcing total bandwidth restrictions. None: no bandwidth available.
Total: <..00000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.
PerCallMode: <None/Limited/Unlimited>
Determines whether or not this pipe is limiting the bandwidth of individual calls. None: no bandwidth available.
PerCall: <..00000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.
PipeDelete Deletes a pipe. PipeId (r) : <..00>
The index of the pipe to be deleted.
RemoveRegistration Removes a registration from the VCS. Registration: <..3750>
The index number of the registration to be removed.
RegistrationSerialNumber: <S: , 55>
The serial number of the registration to be removed.