TANDBERG D14049.01 - Manual (Page 68)

D 14049.01
07.2007 68
Text goes here
Introduction
Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control
Maintenance Appendices
Text goes here
Call
Processing
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Call
Processing
User Policy
Enabling User Policy on the VCS
Save
Click here to save your changes.
Mode
Determines whether or not User Policy will be
enabled, and if so, the location of the User
Policy Manager.
Off : User Policy is not enabled.
Local : User Policy is enabled and the VCS’s
own User Policy Manager is used.
Remote : User Policy is enabled and a User
Policy Manager located on another system
is used. If you select this option, further
configuration options will appear (see below).
Configuring User Policy Manager
To configure the User Policy Manager:
VCS Configuration > Policy > User .
You will be taken to the User Policy page.
xConfiguration Policy UserPolicy
•
•
Path
The URL of the remote User Policy Manager.
Username
The username used by the VCS to log in and
query the remote User Policy Manager.
Protocol
The protocol used to connect to the remote
User Policy Manager.
Address
The IP address or domain name of the remote
User Policy Manager.
Password
The password used by the VCS to log in and
query the remote User Policy Manager.
Administrator Policy will always be
applied regardless of the User Policy
mode.