Snmp configuration, Configuring snmp settings, About snmp settings – TANDBERG D14049.01 User Manual
Page 24: Configuring snmp settings about snmp settings, Text, System configuration
D 14049.01
07.2007
4
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
text
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
About SNMP Settings
The VCS offers basic support for SNMP.
Tools such as TANDBERG Management Suite
(TMS) or HP OpenView may act as SNMP
network management systems (NMS). They
allow you to monitor your network devices,
including the VCS, for conditions that might
require administrative attention.
To allow the VCS to be monitored by a SNMP
NMS, you must enable SNMP on the VCS and
provide the name of the
SNMP community
within which it resides. You may optionally
provide the name of a
System contact
and the
physical
Location
of the system for reference
by administrators when following up on
queries.
By default, SNMP is
Enabled
with a
SNMP
community name
of
public
.
Note: the VCS does not support SNMP traps,
therefore it cannot be managed via SNMP.
SNMP Configuration
System Configuration
Configuring SNMP Settings
To configure the VCS’s SNMP settings:
System Configuration > SNMP
You will be taken to the
SNMP
page.
•
•
Location
Specifies the physical location of the VCS.
Enabled
Select
On
to enable SNMP support.
SNMP community name
Sets the VCS’s SNMP community name.
System contact
Specifies the name of the person who can be
contacted regarding issues with the VCS.
Save
Click here to save your changes.
Restart
Click here to restart the system.
You must save your changes and
restart the system for any changes to
take effect.