Adding zones, Configuring zones, Managing zones, neighbors and alternates – TANDBERG D14049.01 User Manual
Page 52
D 14049.01
07.2007
5
D 14049.01
07.2007
5
Once you have created a new zone on the
local VCS you must configure it appropriately.
For traversal server zones, traversal client
zones and neighbor zones this will include
providing information about the neighbor
system such as IP address and ports.
Zones are configured via the
Edit Zone
page.
You will be taken to this page automatically
upon creation of a new zone. To access this
page for an existing zone:
VCS Configuration > Zones
.
You will be taken to the
Zones
page.
Click on the name of the zone you wish to
configure.
You will be taken to the
Edit Zone
page.
The sections that follow describe the
configuration options available for each zone
type.
•
•
Adding Zones
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the
Type
drop-down menu, select the
type of zone you wish to add.
Once the zone has been created, the
Type
cannot be changed.
Create Zone
Click here to create the zone. You will be
taken directly to the
Edit Zone
page.
In order to neighbor with another system
(e.g. VCS, gatekeeper or Border Controller) or
create an ENUM or DNS zone, you must add
a new zone on the local VCS. When adding a
new zone you will be asked to specify its
Type
;
this will determine which configuration options
will then be available.
To create a new zone:
VCS Configuration > Zones.
You will be taken to the
Zones
page.
Click
New
.
You will be taken to the
Create Zone
page.
•
•
Configuring Zones
Cancel
Click here to return to the
Zones
page without
creating the zone.
TANDBERG
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Managing Zones, Neighbors and Alternates