Tunturi T80 - Manual (Page 7)

GB
O W N E R ’ S M A N U A L
•
T 8 0 T 8 5
7
Press the SET key to choose a user code, enter user
details, select display values, and to display the total
training distance in kilometres and the total training
time in hours.
DISpLAYS
HEART RATE
45-220 bpm. The heart rate light always blinks when
the console is receiving a heart rate signal.
KCAL (estimated energy consumption)
0-9999 kcal, 1 kcal increment
ELEVATION
0-12 %, 0,5 % increment
TIME
Exercise duration at 1 second intervals 00:00-99:59,
and at 1 minute intervals thereafter h1:40-h9:59
DISTANCE
0.00-99.99 km, 0,01 km increment
SpEED
Running deck speed (0,5-20 km/h / 0,3-12,5 mph
(T80) / 0,5-22 km/h / 0,3-14 mph (T85)), 0,1 km /
mph increment. A signal light indicates the selected
measurement unit (km/h, mph, pace = minutes/
kilometre).
GRApHIC / TEXT DISpLAY
T80 features a combined text and profile display
that provides instructions in English when you
switch to an exercise and during the exercise itself.
T85 is equipped with a separate graphic display for
detailed information on your workout profile, while
the text field provides instructions both when you
switch to an exercise and during the exercise itself.
ENTERING USER DETAILS
We recommend that you choose a user code and
save your personal details: these details are needed
e.g. for a more accurate estimation of your energy
consumption. At the same time, you can set the
units to be displayed and check the total training
values. Choosing a user code will also allow you to
save your exercise data.
1. Press SET. Use the arrow keys to select a user
code (1-4). Press ENTER to confirm your selection.
NOTE ! The NO USER option displays device settings,
showing e.g. the total training time and distance.
2. Set the measurement units (Metric = metric
system, Imperial = avoirdupois). Use the arrow keys
to change the setting, and press ENTER to confirm
your selection. You will then move to the next
setting.
3. Set the user weight. Use the arrow keys to change
the setting, and press ENTER to confirm your
selection. This information is needed for estimating
energy consumption. You will then move to the next
setting.
4. Set gender (male, female). Use the arrow keys to
change the setting, and press ENTER to confirm your
selection. This information is needed for estimating
energy consumption. You will then move to the next
setting.
5 . Set the age of the user. Use the arrow keys to
change the setting, and press ENTER to confirm your
selection. This information is needed for estimating
energy consumption. You will then move to the next
setting.
6. Set the audio signal (ON = signals on, OFF =
signals off). Use the arrow keys to change the
setting, and press ENTER to confirm your selection.
You will then move to the next setting. NOTE! In
profile workouts, the console gives an audio signal
in advance of any changes in profile.
7. Set the units to be displayed (km/h, min/km, mph,
min/mile). Use the arrow keys to change the setting,
and press ENTER to confirm your selection. You will
then move to the next setting. NOTE! You can set the
units during exercise: press SET once and use the
arrow keys to change the setting, and press ENTER
to confirm your selection.
8. Set the maximum speed for PSC and HRC
workouts with the arrow keys: since PSC and HRC
adjust the speed level according to your heart rate,
a maximum speed limit is needed to keep the speed
at a suitable level. The default is 12 km/h. Use the
arrow keys to change the setting, and press ENTER
to confirm your selection. You will then move to the
next setting.
9. The TOTAL TIME display shows a user specific total
training time on the treadmill. Press ENTER to move
to the next display.
10. The TOTAL DISTANCE display shows a user
specific total training distance on the treadmill.
Press ENTER to return to user settings or press START
to exit user settings.
Once you have set the user details, you can start
exercising by selecting your own user code. The
selected user code will remain in the console’s
memory until it is replaced with a new one, the
safety key is removed from its place, or the power
cord is unplugged.
pOSITION SpEED CONTROL (pSC)
Position Speed Control (PSC) allows you to adjust
running track speed by changing your position
on the track. Move to the front of the track and it
accelerates, and as you move back the track itself
slows down. When you are walking or running in the
middle section of the track the speed stays steady.
NOTE! You must wear a 5KHz Analog heart rate belt
when you use PSC! A blinking square in the Heart
Rate display indicates that heart rate measurement
is in operation.
NOTE! Attach the holder of the safety key carefully
to your shirt whenever you are using PSC. Adjust
the length of the safety key wire so that it will be
detached from the console, if you move too far back.
NOTE! If you are exercising with PSC, there must
not be another heart rate transmitter near the
treadmill (minimum distance 2 m); the simultaneous