American Magnetics 4Q1010PS-430 Integrated Power Supply System - Manual (Page 187)

Rev. 5 169
Appendix
Remote Computer Communication (Ethernet)
Note
The Addr Assignment (Present) must show “DHCP” as originally set
by AMI.
Note
In the following step, the IP Address is the four part number
separated by periods (.), and will change with each Ethernet
connection.
6. Use < >/< > to locate IP Address (Present), similar to that shown
in Figure 1.
7. Make note of the IP Address (Present).
8. Start a terminal
emulation program on
the remote computer.
As an example, this
procedure will use the
HyperTerminal
program running
under Windows XP.
9. Choose File > New
Connection
and in the resulting
screen field, enter a name for the
connection. Click OK - the
Connect to
screen will appear.
+0.00 A — IP Address (Present)
+0.00 Vs
169.254.243.199 (DHCP)