American Magnetics 4Q1010PS-430 Integrated Power Supply System - Manual (Page 188)

170 Rev. 5
Appendix
Remote Computer Communication (Ethernet)
10. In Host address, enter the Model
430 Programmer IP address as
determined previously in step 2.
11. Enter 7180 in the Port Number
field.
12. From the Connect using pull-down
menu, select TCP/IP (Winsock) and
click OK.
13. The computer will
connect with the
Model 430
Programmer and
display a welcome
screen.
14. Choose File >
Properties
and then click on the
Settings
tab.