American Magnetics 4Q1010PS-430 Integrated Power Supply System - Manual (Page 197)

Rev. 5 179
Appendix
Model 430 Firmware Upgrade via Flash Card Reader
a. Grasp the edges of the card with the thumb and forefinger.
b. Gently pull outward to remove the card.
4. Insert the CF card into a CF reader attached to (or internal to) a
host computer.
5. Browse to My Computer on the host computer to verify the CF card
is visible as a drive.
A.14.3 Procedure
The following steps provide detailed instructions to complete the upgrade.
1. Copy the zip file Model 430 flash card update.zip to a location on
the host computer – for example, C:\Model 430\Model 430 v1.60
Upgrade:
2. Double-click the zip file to open it – the following or similar screen
should appear with the files shown:
1. The Compact Flash card is located at the front right corner of the
Model 430 motherboard.