GE Industrial Solutions AF-300E$ - Manual (Page 88)

LCD
GRAPHIC
FACTORY
FUNCTION DISPLAY SETTING DESCRIPTION SETTING
6-31
73 ACC PTN ACCELERATION/DECELERATION PATTERN 0
Selection can be made from the following
types:
0: Linear acceleration/deceleration (Fig. a)
1: S curve acceleration/deceleration (Fig. b)
2: Non-linear for variable torque load (Fig. c)
74 N/A NOT USED 0
75 ENERGY SAV ENERGY SAVINGS 0
Automatically saves energy by weakening
the V/Hz pattern during light load opera-
tion.
0: Inactive
1: Active-Volt/Hz ratio is decreased auto-
matically at light loads. Not active
during acceleration or deceleration.
76 REV-PH LOC REVERSE DIRECTION LOCK OUT 0
Prevents the drive from operating in
a reverse direction.
0: Inactive
1: Active-Will not allow the motor to run in
reverse direction even in pattern mode.
77 DATA INIT DATA INITIALIZATION 0
Allows resetting Function Codes to factory
settings.
0: Manual setting value (customized drive
settings).
1: Return to factory default setting values.
* 78 LANGUAGE LANGUAGE SELECTION 1
Allows selection of the language in which
the LCD Graphic Display will be shown.
0: Japanese
1: English
2: Spanish
3: French
SPECIAL FUNCTIONS
Accel Decel
Output
Frequency
t Linear
Accel Decel
Output
Frequency
t S Curve
Accel Decel
Output
Frequency
t Non-Linear
Fig. A Fig. B Fig. C