Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 186)

Logic Functions - Book 1
REMOTE I/O INTERFACE MODULE BLOCK
6-8
14 Database Checksum Error (DBASERRS) ........................................................................ CWR
This diagnostic indicates that the remote I/O database stored in the interface module has been
declared bad due to a checksum error. This diagnostic can be suppressed or enabled as
follows:
ENABLE 0 Diagnostic error is not suppressed and errors are reported to the
System Event block.
SUPPRESS 1 Diagnostic error is suppressed. Acknowledgement status remains
clear.
15 Unacknowledged Database Checksum Error (DBASERRU) .........................................– WR
If the database checksum error diagnostic is enabled, the unacknowledged diagnostic status
indicates if the diagnostic is or is not acknowledged. The status can be acknowledged or read
as follows.
NO 0 Diagnostic error is acknowledged.
YES 1 Diagnostic error is unacknowledged.
16 Active Database Checksum Error (DBASERRA) ............................................................– WR
If the database checksum error diagnostic is enabled, the active status indicates if the error is
active even after acknowledgement. The status can be read as follows.
NO 0 Diagnostic error is not active.
YES 1 Diagnostic error is active.
17 Module Error (EXTERRS) ................................................................................................. CWR
The module error diagnostic checks for RIO module errors. Errors are stored in the block
database as EXTERR (see attribute 23). This diagnostic can be suppressed or enabled as
follows.
ENABLE 0 Diagnostic error is not suppressed and errors are reported to the
System Event block.
SUPPRESS 1 Diagnostic error is suppressed. Acknowledgement status remains
clear.
18 Unacknowledged Remote Module Error (EXTERRU) ....................................................– WR
If this remote module error diagnostic is enabled, the unacknowledged status indicates if the
diagnostic is or is not acknowledged. The status can be acknowledged or read as follows.
NO 0 Diagnostic error is acknowledged.
YES 1 Diagnostic error is unacknowledged.
19 Active Remote Module Error (EXTERRA) .......................................................................– WR
If this diagnostic error is enabled, the active status indicates if the error is active even after
acknowledgement. The status can be read as follows.
NO 0 Diagnostic error is not active.
YES 1 Diagnostic error is active.