Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 65)

Logic Functions - Book 1
SYSTEM EVENT BLOCK
3-39
37 Report Process Alarm Events (RPTPA) ....................................................................CWR
Used to enable reporting of Process Alarm events.
YES 1 Report process alarm events to the event queue.
NO 0 No event reporting is made for ALL Process Alarms in the
database.
38 Report Notification Message Events (RPTNM) ........................................................CWR
Used to enable reporting of notification/request message events.
YES 1 Report notification/request message events to the event queue.
NO 0 No event reporting is made for ALL Notification/Request
Messages in the database.
39 Report System Event Events (RPTSE)......................................................................CWR
Used to enable reporting of system events.
YES 1 Report this block’s events to the event queue.
NO 0 No event reporting is made for the System Event block.
40 Global Acknowledge Command (GLBACK) ............................................................. – WR
Writing TRUE to this command causes all diagnostics, process alarms and notification/
request messages to be acknowledged. This is a one shot type command (value in
database remains FALSE).
41 Diagnostic Acknowledge Command (DGACK) ....................................................... – WR
Writing TRUE to this command causes all diagnostic alarms to be acknowledged. This is
a one shot type command (value in database remains FALSE).
42 Process Alarm Acknowledge Command (PAACK) ................................................. – WR
Writing TRUE to this command causes all process alarms to be acknowledged. This is a
one shot type command (value in database remains FALSE).
43 Notification/Request Message Acknowledge Command (NMACK) ...................... – WR
Writing TRUE to this command causes all notification/request messages to be
acknowledged. This is a one shot type command (value in database remains FALSE).
44 Clear Queue Command (CLRQCMD)........................................................................ – WR
Writing TRUE to this command causes the event queue to clear. This is a one shot type
command (value in database remains FALSE).
45 Any Active Diagnostics (ANYACT) ............................................................................– – R
The active diagnostics status output is a block output that is TRUE when there is any
active diagnostic alarm in the instrument; otherwise, it is FALSE (no active diagnostic
error).
46 Any Unacknowledged Diagnostics (ANYUNK).........................................................– – R
The unacknowledged diagnostic status output is a block output that is TRUE when there
is any unacknowledged diagnostic alarm in the instrument; otherwise, it is FALSE (no
unacknowledged diagnostics).