Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 44)

Logic Functions - Book 1
INTERFACE BLOCK
3-18
95 Bad Clock Chip Unacknowledged (BDCLKUAK) ............................................................– WR
The unacknowledged bad clock chip diagnostic indicates if the condition is or is not
acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
96 Bad Clock Chip Active (BDCLKACT) ............................................................................... – – R
The real time clock chip is not working correctly. Time and date information will not remain
current through a power outage.
YES 1 “BAD CLOCK CHIP” is active.
NO 0 Diagnostic error is not active.
97 Time and date not valid (TIMNSSUP) .............................................................................. CWR
The time and date not valid diagnostic checks if the time of day, calendar date, and day of
week need to be set. The diagnostic can be suppressed or enabled as follows:
SUPPRESS 1 Diagnostic error is suppressed.
ENABLE 0 Diagnostic error is enabled.
98 Time and date not valid Unacknowledged (TIMNSUAK) ...............................................– WR
The unacknowledged time and date not valid diagnostic indicates if the condition is or is not
acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
99 Time and date not valid Active (TIMNSACT) .................................................................. – – R
The time of day, calendar date, and day of week need to be set.
YES 1 “TIME AND DATE NOT VALID” is active.
NO 0 Diagnostic error is not active.
100 I/O is Locked Unacknowledged (IOLOKUAK) .................................................................– WR
The unacknowledged I/O is locked diagnostic indicates if the condition is or is not
acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
101 I/O is Locked Active (IOLOKACT) .................................................................................... – – R
The I/O lock active is set when Attribute 195, Lock I/O blocks? (IOLOCK) is YES.
YES 1 “I/O IS LOCKED” is active.
NO 0 Diagnostic error is not active.
102 Communication Blocks are Locked Unacknowledged (CMLOKUAK)..........................– WR
The unacknowledged communication blocks are locked diagnostic indicates if the condition is
or is not acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.