Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 39)

Logic Functions - Book 1
INTERFACE BLOCK
3-13
16 Memory Module Database Version Error Unacknowledged (MDVERUAK)................. – WR
The unacknowledged “memory module database version error” diagnostic indicates if the
error is or is not acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
17 Memory Module Database Version Error Active (MDVERACT).....................................– – R
A module database was not downloaded because the instrument does not have the hardware
and/or firmware resources to run it.
YES 1 “MEMORY MODULE DATABASE VERSION ERROR” is active.
NO 0 Diagnostic error is not active.
18 Memory module is write protected (MDWPSUP) ............................................................CWR
The memory module is write protected diagnostic checks if the memory module is write
protected (the switch on the module is in the ‘read only’ position. The diagnostic can be
suppressed or enabled as follows:
SUPPRESS 1 Diagnostic error is suppressed.
ENABLE 0 Diagnostic error is enabled.
19 Memory Module is Write Protected Unacknowledged (MDWPUAK)............................ – WR
The unacknowledged “memory module is write protected” diagnostic indicates if the condition
is or is not acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.
20 Memory Module is Write Protected Active (MDWPACT)..............................................– – R
The memory module is write protected (the switch on the module is in the ‘read only’ position.
YES 1 “MEMORY MODULE IS WRITE PROTECTED” is active.
NO 0 Diagnostic error is not active.
21 Memory module is soft write protected (MDSWPSUP)..................................................CWR
The memory module is soft write protected diagnostic checks if the write protect bit in the
module RAM has been set by software. The diagnostic can be suppressed or enabled as
follows:
SUPPRESS 1 Diagnostic error is suppressed.
ENABLE 0 Diagnostic error is enabled.
22 Memory module is soft write protected Unacknowledged (MDSWPUAK) .................. – WR
The unacknowledged “memory module is soft write protected” diagnostic indicates if the
condition is or is not acknowledged. The status can be read or acknowledged as follows:
YES 1 Diagnostic error is unacknowledged.
NO 0 Diagnostic error is acknowledged.