Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions User Manual

Page 64

Advertising
background image

Logic Functions - Book 1

SYSTEM EVENT BLOCK

3-38

30

Report Alarm Event: Acknowledged (RALACK) .......................................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm is acknowledged by a single
acknowledge message to the system event queue.

NO

0

No reports are made.

31

Report Alarm Event: Globally acknowledged (RALGLACK) ...................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm is globally acknowledged to the
system event queue.

NO

0

No reports are made.

32

Report Alarm Event: Acked by suppression (RALABYS)........................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm is acknowledged by any method
of suppression to the system event queue.

NO

0

No reports are made.

33

Report Alarm Event: Suppressed (RALSUP)............................................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm’s suppression attribute is set to
YES to the system event queue.

NO

0

No reports are made.

34

Report Alarm Event: Enabled (RALENA) ..................................................................CWR
Used to enable the reporting of the event.

YES

1

Report when a PA or NM alarm’s suppression attribute is set to
NO to the system event queue.

NO

0

No reports are made.

35

Report Informational Events (RPTINF) .....................................................................CWR
Used to enable reporting of informational events associated with all blocks.

YES

1

Report informational events to the event queue.

NO

0

No reports are made.

36

Report Block ‘State’ Changes (RPTSTA) ..................................................................CWR
Used to enable reporting of state changes associated with all blocks.

YES

1

Report block state transition to the event queue.

NO

0

No reports are made.

Advertising