Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) System, I/O and Communications Functions - Manual (Page 61)

Logic Functions - Book 1
SYSTEM EVENT BLOCK
3-35
04 ALL Groups Diagnostic Suppression (SUPALL)......................................................CWR
05 Group 1 Diagnostic Suppression (SUPGP1) ............................................................CWR
06 Group 2 Diagnostic Suppression (SUPGP2) ............................................................CWR
07 Group 3 Diagnostic Suppression (SUPGP3) ............................................................CWR
08 Group 4 Diagnostic Suppression (SUPGP4) ............................................................CWR
09 Group 5 Diagnostic Suppression (SUPGP5) ............................................................CWR
10 Group 6 Diagnostic Suppression (SUPGP6) ............................................................CWR
11 Group 7 Diagnostic Suppression (SUPGP7) ............................................................CWR
Used to suppress the reporting of all diagnostic errors associated with a particular group
or groups 1 to 7 (if ALL Groups is selected). Diagnostic errors can be associated with a
group in various blocks throughout the database. If a block has a diagnostic error that
cannot be suppressed, then it cannot have group suppression. You can use the blank
space at the bottom of the System Event block form to record what blocks are in a
particular group.
YES 1 Diagnostic errors are suppressed. Diagnostics associated with
all groups (1-7) or individual group 1 through 7 are now
suppressed. This does not mean that a diagnostic’s suppression
attribute value has been changed.
NO 0 Diagnostic errors are not suppressed. Diagnostics associated
with all groups (1-7) or individual group 1 through 7 are now
unsuppressed. This does not mean that a diagnostic’s
suppression attribute value has been changed.
12 Report Diagnostic Event: ‘Ack only’ goes unacked (RAOU) ..................................CWR
Used to enable the reporting of the event.
YES 1 Report ‘Acknowledge Only’ diagnostic event to the system event
queue when the event goes unacknowledged.
NO 0 No reports are made.
13 Report Diagnostic Event: ‘Ack only’ occurs while unacked (RAOAGN) ...............CWR
Used to enable the reporting of the event.
YES 1 Report ‘Acknowledge Only’ diagnostic event to the system event
queue when the event occurs again while it is still
unacknowledged.
NO 0 No reports are made.
14 Report Diagnostic Event: Goes active and unacked (RDGAU) ..............................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event goes active and
unacknowledged to the system event queue.
NO 0 No reports are made.
15 Report Diagnostic Event: Goes active while unacked (RDGAWU) ........................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event goes active while it is still
unacknowledged to the system event queue.
NO 0 No reports are made.