IAI America SEL-TG - Manual (Page 103)

7. Simple Operation Procedure
85
The cursor has moved to the location of the step
No.
Press the return key.
Enter commands.
Commands are displayed in the function key
section.
Command search method
㽲 When the cursor is at the location for command
input, pressing the SF key displays commands
in alphabetical order. They are displayed in
reverse order by pressing the
key.
㽳 Letters/alphabetic letters are located for each
of the 10 key (such as ABC allocated to the 7
key). Every time a key of the 10 key is pressed
when the cursor is located at the command
input section, the first command of which the
initial letter is the relevant alphabetic letter is
displayed in the function key section.
However, as shown in the diagram at the left,
the initial AXX key and other keys such as
ABPG, BGPA and CANC are displayed in any
of F1 to F4 function key section.
Display the command for input in the function
key section with the steps of
㽲 and 㽳 above
and press the corresponding function key.
Search for command ACCS
Pressing the 7 key displays the commands with
the initial letters of A, B, and C. (Some commands
cannot be displayed only by pressing a key of the
10 key. In such cases, display the command by
using the ten-key, SF key and
key.
After displaying ACCS in the function key section,
press the F3 (ACCS) key. (To return the command
input field to blank, press the BS key.)
Press the return key.
Command with an initial letter of A
Command with an initial letter of B
Command with an initial letter of C