IAI America SEL-TG User Manual
Page 237
16. Controller
219
* If case (1)
㽲 and (2) 㽲 occur at the same time, you need to first execute Driver Power
Recovery Request. After completing it, execute the Action Pause Release Request.
18
.12. Selection of Two or More Programs Start Prohibition/Permission
Sets whether to permit or prohibit the simultaneous starting of multiple programs in the manual
mode.
If prohibition is set, multiple programs will not be able to be started simultaneously. (Error no. 913
³&DQ¶WVWDUWWZRRUPRUHSURJUDPV´ZLOORFFXU
Select the F1 (MTsk) key on the controller screen.
0RGH7UDQVLWLRQ&WO±07VN
* This function is valid only for the following models:
ƒ X-SEL-P/Q (main application Ver. 0.36 or later)
ƒ X-SEL-PX/QX (main application Ver. 0.17 or later)
ƒ SSEL, ASEL, PSEL (main application Ver. 0.01 or later) (*only in the program mode)
To permit the simultaneous starting of multiple
SURJUDPVSUHVV³´7RSURKLELWLWSUHVVWKH>;@NH\
Then, press the F1 (OK) key.
7RFDQFHOWKHVHWWLQJSUHVVWKH)&DQFNH\
If the F1 (OK) key is pressed and executed on the
previous screen, this screen will be displayed.
To execute the setting, press the F4 (AStp) key.
7RFDQFHOWKHVHWWLQJSUHVVWKH(6&NH\
Note: To set prohibition, it is required to exit all the
program execution.
16.12.
• XSEL-R/S, RX/SX, RXD/SXD
• SSEL, ASEL, PSEL (main application Ver. 0.01 or later) (*only in the program mode)