IAI America SEL-TG - Manual (Page 170)

10. Position Edit
152
10.4. Copy and movement of position data
The following operating instructions are to copy or move the position data to another position No.
Select the F1 (Edit) key on the Mode Selection
screen.
Select the F1 (Posi) key.
Select the F3 (Copy) key.
Enter the first No. and the last No. of the positions
from which data is copied or moved with the 10 key
and press the return key.
Enter the first No. of the positions to which data is
copied or moved with the 10 key and press the
return key.
When copying the data, press the F3 (Copy) key.
When moving the data, press the F4 (Move) key.
The execution confirmation screen will be displayed.
To copy the data, press the F1 (Yes) key. If not,
press the F2 (No) key.
Press the ESC key to return to the previous screen.
When writing the data in Flash ROM, press the ESC
key several times to return to the Flsh screen.
First No. of positions from which data is copied or moved
Last No.
Positions to which data is copied or moved
First No.