IAI America SEL-TG - Manual (Page 32)

14
3. Connection to Controller
14
3.3. Teaching Pendant Connection Procedure
1. Connect actuators, I/O 24VDC power source, and system I/O to the controller first. Then
connect the cable connector of the teaching pendant to the controller’s teaching connector
when the main power supply of the controller is OFF.
 $IWHU\RXÀLSWKHPRGHVZLWFKWR0$18VLGHVXSSO\SRZHUWRWKHFRQWUROOHU
Teaching Pendant
LCD Display
Displays the version of the teaching pendant and moves
If the mode is switched to AUTO side, the teaching
pendant does not connect to the controller and the screen
on the left will be displayed. Press ESC key and make it
reconnected.
Re-connection Screen
Turn on the mode switch to MANU side and press the F1
(Yes) key to execute re-connection.
Mode Selection Screen
This is the basic screen for all operations.
to the following mode selection screen.