IAI America SEL-TG - Manual (Page 36)

18

7HDFKLQJ3HQGDQW)XQFWLRQDQG6SHFL¿FDWLRQV
18
4. F1 F2 F3 F4 (Function keys)
Correspond to each item in the LCD display (function key section).
The LED is lit when the relevant key is operable.
5. SF key (Shift key)
If there are more than 5 selectable functions (“ o“ will be displayed at right side of the function
key area), it will change the display items in the function key area.) When the key is operable,
its LED is lit.
6. WRT key (Write key)
Transmits edit data to the controller. (Data will be saved in the memory of the controller.)
Only the data shows on the LCD display will be transmitted. (Plural position No., program step
No, etc., can’t be transmitted all together at the same time.)
7. ESC key (Escape key)
Returns to the previous status from the current status.
If you press this key during data input, the data will be cancelled.
8. BS key (Backspace key)
If you press this key during data input, clear one letter before.
At other time, clear the data where the cursor is placed.
9. (Cursor key)
Moves the cursor.
10. 10 keys
You can input number, alphabet, and sign.
When the cursor is at any item requiring the input of characters other than “0” to “9” (such as
hexadecimal and character strings), the input mode selection is displayed in the function key
area. (Alph: alphabet symbol input, Num: numerical value input)
11. € key (Return key)
Confirms the input data and moves the cursor position forward .
12. PAGE UP · PAGE DOWN key
Increment or decrement edit and display item No. (Position No., Program No., Step No., etc.)