Brocade FastIron GS and GS-STK Hardware Installation Guide - Manual (Page 104)

94 Brocade FastIron GS and GS-STK Hardware Installation Guide
53-1002186-02
Installing or replacing a POE daughter card
8
DRAFT: BROCADE CONFIDENTIAL
FIGURE 59 Installing a POE Daughter Card in the FGS624P-POE or FGS624P-POE-STK device
Figure 60 shows the location of the POE daughter cards on the main board of the
FGS648P-POE and FGS648P-POE-STK devices.
FIGURE 60 Installing a POE Daughter Card in the FGS648P-POE and FGS648P-POE-STK devices.
4. Re-assemble the device as instructed in the section “Reassembling the device” .
5. Power ON the device and observe the console. The following message will appear:
Info: PoE module detected in slot 1. Initializing....
6. Enable POE and configure POE parameters. Refer to the FastIron Configuration Guide for
information.
Reassembling the device
Reassemble the device using the following steps:
1