Brocade FastIron GS and GS-STK Hardware Installation Guide - Manual (Page 38)

28 Brocade FastIron GS and GS-STK Hardware Installation Guide
53-1002186-02
Installing a redundant power supply
2
DRAFT: BROCADE CONFIDENTIAL
FIGURE 23 Inserting the DC power supply
FIGURE 24 Engaging the DC power supply connectors
7. Press the two latches on the supply outward to lock the supply in place.
8. If you removed the receptacle for the positive and negative terminals, re-position it and secure
the screws.
1 Power supply
2 Connectors
2
1