Figure 28 – Brocade FastIron GS and GS-STK Hardware Installation Guide User Manual
Page 42
32
Brocade FastIron GS and GS-STK Hardware Installation Guide
53-1002186-02
Installing the device
2
DRAFT: BROCADE CONFIDENTIAL
FIGURE 28
Attaching the long mounting brackets
3. Mount the device in the rack as illustrated in
.
NOTE
Although
shows a device with short mounting brackets, the procedure for securing a
device with long mounting brackets is the same.
FIGURE 29
Installing the device in a rack
NOTE
If you are installing a device with two power supplies into a Telco rack, you must remove one of the
power supplies in order to slide the device into the rack. The back panels of the power supplies
overhang the device by approximately .25 inches, making it impossible to insert into a standard
Telco rack with both power supplies installed.
4. Proceed to