Brocade FastIron GS and GS-STK Hardware Installation Guide - Manual (Page 31)

Brocade FastIron GS and GS-STK Hardware Installation Guide 21
53-1002186-02
Installation precautions
2
DRAFT: BROCADE CONFIDENTIAL
CAUTION
Make sure you insert the power supply right-side up. It is possible to insert the supply upside
down, although the supply will not engage with the power backplane when upside down. The
power supply is right-side up when the power connector is on the left and the fan vent is on the
right.
CAUTION
Remove the power cord from a power supply before you install it in or remove it from the device.
Otherwise, the power supply or the device could be damaged. (The device can be running while a
power supply is being installed or removed, but the power supply itself should not be connected
to a power source.)