West Control Solutions Pro-16 - Manual (Page 38)

Configuration
level
9499-040-93811 / 59537-1 Page 38 of 88 Pro-16
6 è -Key function (see chapter 3.6 page 14)
7 Limit 1
8 Limit 2
9 Limit 3
P.oFF Programmer Run/Stop (see page ) 0
0 no function (switch-over via interface is possible)
2 DI1
3 Di 2
4 DI3 (only visible with OPTION)
5 DI4 (only visible with OPTION)
6 è -Key function (see chapter 3.6 page 14)
7 Limit 1
8 Limit 2
9 Limit 3
di.Fn Function of digital inputs (valid for all inputs) 0
0 direct
1 inverse
2 toggle key function
fDI1
fDI2
fDI3
fDI4 Forcing di1/ di2 / di3 (only visible with BlueControl!) 0
0 No forcing
1 Forcing via serial interface
othr
Name Value range Description Default
bAud Baudrate of the interface (only visible with OPTION) 2
0 2400 Baud
1 4800 Baud
2 9600 Baud
3 19200 Baud
Addr 1...247 Address on the interace (only visible with OPTION) 1
PrtY Data parity on the interface (only visible with OPTION) 1
0 no parity (2 stop bits)
1 even parity
2 odd parity
dELY 0...200 Delay of response signal [ms] (only visible with OPTION) 0
Unit Unit 1
0 without unit