West Control Solutions Pro-16 - Manual (Page 47)

Configuration
level
9499-040-93811 / 59537-1 Page 47 of 88 Pro-16
4.4.2 2-point and continuous controller (inverse)
ConF/Cntr SP.Fn = 0 set-point / cascade controller
C.Fnc = 1 2-point and continuous controller (PID)
C.Act = 0 inverse action (e.g. heating applications)
ConF/Out.1: O.Act = 0 action Out.1 direct
Y.1 = 1 control output Y1 active
ConF/Out.3: O.tYP = 1 / 2 Out.3 Type ( 0/4 … 20mA)
Out.0 = -1999...9999 scaling analog output 0/4mA
Out.1 = -1999...9999 scaling analog output 20mA
O.Src = 1 controller output y1 (continuous)
PArA/Cntr: Pb1 = 1...9999 proportional band 1 (heating) in units of phys. quantity
(e.g. °C)
ti1 = 0,1...9999 integral time 1 (heating) in sec.
td1 = 0,1...9999 derivative time 1 (heating) in sec.
t1 = 0,4...9999 min. cycle time 1 (heating)
PArA/SEtP: SP.LO = -1999...999 set-point limit low for Weff
SP.Hi = -1999...9999 set-point limit high for Weff
g
For direct controller action, the controller action must be changed
( ConF / Cntr / C.Act = 1 )